MLS-BA-defsi-0713
114
9.6 Enter target weight of the sample
The user can enter a target weight with tolerance range of the probe.
This entry makes it possible to use identical sample sizes for each drying process.
Operator Indication
Ö Actuate -key, use the cursor (►) to select the
desired parameter (“sample“);
Ö Actuate -key to open the selection “sample“
Ö If the setting is no, this function is not active.
Ö If the setting is active the sample size and the
tolerance range of the sample dosing can be
entered (%)
To Next Page
Loading...
