MLS-BA-defsi-0713
129
15 Maintenance, upkeep, disposal
15.1 Cleaning
Please disconnect the device from the operating voltage before cleaning.
To clean, remove the components one after the other (see illustration).
Only use a cloth dampened with mild suds and not aggressive cleaning agents
(solvents or similar). Please ensure that fluids are not able to get into the device and
rub off using a clean, soft cloth.
Loose sample residue/powder can be removed carefully using a brush or hand
vacuum cleaner.
Remove any spilt material to be weighed immediately.
Sample plate
Extraction aid
Plate holder
Wind protection
To Next Page
Loading...
Need help?
General
