KERN MPE 250K100HNM - Menu Overview: Data Output and Printer

12 MPE_HNM / MPE_PNM -SH-e-1810
3. Data output format
(P Prt, P Auto, P Cont settings only)
the currently set data output format will be shown after the
baud rate was confirmed. Select desired format by and
confirm with .
Only when set P Prt, P Auto
Prt 0-3
Data output format, see chap. 13.
Only when set P Cont
Cont 1
Default
Sd0 – on/off
Cont. data outputselectable
„send 0“, yes / no
Cont 2
Not documented
Cont 3
Not documented
4. Printer type
After the data output format has been confirmed, the currently set
printer type will be displayed.
Select the desired printer type by and confirm by .
LP -50
Not documented
tPUP
Usethissetting
Background
illumination
bl on
Back lighting for display on
bl oFF
Display background illumination off
bl AU*
Backlighting for display will come on automatically as
soon as the weighing scale is operated.
Subsequent tare
value
locked in devices
with type approval
certificate.
Str on
Subsequent tare ON
Str oFF*
Subsequent tare OFF