KERN MPE 250K100HNM - Adjustment Procedure

MPE_HNM / MPE_PNM -SH-e-1810 17
7.1 Procedure:

 In weighing mode, press repeatedly until [tCH] appears.
 Press and [Pin] will appear.
Press , and one after the other and [P1 SPd] will
appear

 Press , „P2 CAL“ will be displayed
 Operate adjustment switch; for position see chap.16
 Press and [dESC] will appear
 Press repeatedly until „CAL“ will be displayed.
 To confirm, press and [UnloAd] will appear
 Ensure that there are no objects on the weighing pan.
 Wait until the stability display „STABLE“ is displayed and then
confirm by pressing .
(example)
 The size of the currently set adjustment weight will be
displayed.
To change, select the digit to be altered by , and the
numerical value by .
 Confirm by pressing and [LoAd] will be displayed.