KERN PCB - Display Background Illumination

PCB-BA-e-1315
28
Display
background
illumination
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE button several times until „bl“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key.
bl
on
Background illumination
switched on
Contrastful display which can
also be red in the darkness.
bl
off
Background illumination
switched off
Battery saving
bl
Ch
The background illumination
will be switched off
automatically 10 sec after
having reached a stable
weighing value.
Battery saving
 Use the SET key to confirm selection.