KERN PCB Operating Manual

PCB-BA-e-1315
32
printout
Using this function data are selected which are to be sent via the
RS232C (not valid for data transfer mode BAPr ).
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE key several times until „LAPr“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired output parameter by pressing the MODE key
Hdr
Edition of the headlines
GrS
Edition of the total weight
Net
Edition of the net weight
tAr
Edition of the tare weight
N7E
Edition of the stored weight
PCS
Edition of quantity
AUJ
Edition of the unit weight
Rqt
Edition of the reference quantity
FFd
Edition of a page feeding at start printer output
FFE
Edition of a page feeding at end printer output
 After actuating the SET button, the current state is displayed ( on
/ off ).
 Use MODE and PRINT key to change the status
„on  off“.
 Use the SET key to confirm selection. The balance returns to
weighing mode.
By that way the user can configurate his own data block, which then
is sent to a printer or to a PC.

KERN PCB Specifications

General

Brand	KERN
Model	PCB
Category	Scales
Language	English