KERN TCKE 300-3-A

CKE-BA-e-2132 5
1 Technical specification
Big housing:
KERN CKE 6K0.02 CKE 8K0.05 CKE 16K0.05 CKE 16K0.1
Product number / type TCKE 6K-5-A TCKE 8K-5-A TCKE 16K-5-A TCKE 16K-4-A
Interval (d)
0.02 g 0.05 g 0.05 g 0.1 g
Weighing range (Max)
6,000 g 8,000 g 16,000 g 16,000 g
Tare range
(subtractive)
6,000 g 8,000 g 16,000 g 16,000 g
Reproducibility 0.04 g 0.05 g 0.1 g 0.1 g
Linearity ±0,1 g ±0,15 g ±0,25 g ±0,3 g
Settling time (standard) 3 s
Minimum part weight when
counting the number of pieces in
laboratory conditions*
20 mg 50 mg 50 mg 100 mg
Minimum part weight when
counting the number of pieces in
standard conditions*
200 mg 500 mg 500 mg 1 g
Adjustment points 2/4/5/6 kg 2/4/5/7/8 kg 5/10/15/16 kg 5/10/15/16 kg
Recommended adjustment
weight F1
(not delivered)
5 kg 5 kg + 2 kg 10 kg + 5 kg 10 kg + 5 kg
Heating time 4 h 2 h 4 h 2 h
Weight units g, kg, lb, gn, dwt, oz, ozt
Air humidity max. 80%, relative (non-condensing)
Permissible ambient temperature +10°C ... +40°C
Input voltage
of the device
9 V, 300 mA
Input voltage of
the power supply
110–240 VAC; 50/60 Hz
Batteries (option) 6 pcs., 1.5 V, type AA
Rechargeable battery operation
(option)
operating time 90 h (illumination off)
operating time 40 h (illumination on)
charging time ca. 10 h
Automatic switch-off (batteries) 3 min
Automatic switch-off (mains) the choice of: 1, 2, 3, 5, 30 min
Housing dimensions
(W × D × H) [mm]
350 × 390 × 120
Scales plate,
stainless steel [mm]
340 × 240
Net weight [kg] 6.5
Interfaces
• RS-232 (DB9 port), standard equipment
• 'USB Device' (USB B) port, factory option
Equipment for the under-scales
weighing hanger
yes (hook included)