34 CKE-BA-e-2132
13 Communication with a peripheral device using KUP (Small housing)
The interfaces enable to exchange weighing data with the connected peripherals.
The data can be transferred to the printer, computer or control indicators. And vice versa, it
enables to give control commands and enter data using the connected devices.
PCD series scales have KUP (KERN Universal Port) as a standard.
You can use the following three interface options:
Interface adapter with a cable
The available interfaces can be used in parallel via the KUP (YKUP-13).
Scale port load
Warning: Use only for KUP interfaces
To Next Page
Loading...
