Testing Your Blood Uric Acid Level
CAUTIONS:
You can only use blood uric acid test strips and check strip on GCUHb meter.
1.
When you first time use the
GCUHb meter or open a new test strip
vial, insert the code key from the test strip vial. Each test strip vial contains
one code key. Make sure the number on the code key matches the code
number on the vial of test strips you use.
2. Take one strip from the vial. Close the vial quickly.
Cautions:
The test strips can be damaged when they are not capped and stored properly.
3.
Insert the test strip into the test strip slot on the meter.The meter will first
display code number, then the blood symbol along with date.
4.
5. Place the puncturer on your finger.
When the screen shows blood symbol
, clean your finger with
alcohol swab. Let it dry completely.
30
To Next Page
Loading...