Checking the Unit of Measurement
Before you get started…
GCUHb meter can measure your blood glucose and cholesterol in metric unit, mmol/L
or milligrams per deciliter, mg/dL;
GCUHb meter can measure your uric acid in metric
unit, μmol/L or milligrams per deciliter, mg/dL.
GCUHb meter can measuse your
hemoglobin in metric unit,mmol/L or grams per deciliter,g/dL.You should check this setting every
time you put batteries into your meter.
Ensure that unit changing switch is in the “down” position to read unit in mg/dL(g/dL).
In the “down” position, the switch has been pushed toward the middle of the battery
compartment.
NOTE:
The unit of blood glucose and cholesterol test results displayed on the screen is either mg/dL
or mmol/L, depending on which unit of measurement you have selected. The mmol/L results
always include a decimal point; mg/dL results do not include a decimal point.
The unit of blood uric acid test result displayed on the screen is either mg/dL or μmol/L,
depending on which unit of measurement you have selected. The mg/dL results always
include a decimal point; μmol/L results do not include a decimal point.
The unit of blood hemoglobin test results displayed on the screen is either g/dL or mmol/L,
depending on which unit of measurement you have selected. The mmol/L results always include
a decimal point; g/dL results do not include a decimal point.
9
To Next Page
Loading...