Kernel Multi Check - Interpreting Meter Symbols and Error Codes

The battery power is low. Replace new batteries.
“LO” flashes 5 times before the
meter turning off automatically.
The batteries are dead.
LO
LO
pm
The environmental temperature
is too low to perform a test.
“LO” flashes 5 times.
Repeat the test in a warm place
about 57.2°F~104°F (14°C~40°C).
You may need to wait as long
as 20 minutes for the meter to
warm up before testing again.
The environmental temperature
is too high to perform a test.
“HI” flashes 5 times.
Repeat the test in a cool place
about
57.2°F~104°F (14°C~40°C).
You may need to wait as long
as 20 minutes for the meter to
cool down before testing again.
HI
pm
Replace new batteries.
The meter starts to count down
then show your result on the
screen (10 seconds for glucose;
150 seconds for cholesterol
；
20 seconds for uric acid；10
seconds for hemoglobin
after the beep sound).
No action required.
Glu
pm
pm
CHOL
pm
UA
pm
Hb
SYMBOL
WHAT IT MEANS ACTION
41