Kessel EasyClean - Technical Specifications and Data

38 / 48
Technical data
V 1.0
5 Technical data
5.1 Torques
Description / use Torque Nm Spanner size
Door hinge screw A2 bright 6x40 4.5 ±0.5
T30
PT-screw 100x30 A2
7 T50
PT-screw KB60x30 WN 1411 4.5 ±0.5
T30
Prole clamp / on system tank
3 ISK 10mm
Hexagon safety screw M8x30
10
Spanner socket
13 mm
Pipe clamp D=120
8-10
Spanner socket
13 mm
Pipe clamp D=84
8-10
Spanner socket
13 mm
PT-hexagon screw K80x40 WN 1447
5.5 ±0.5
Spanner socket
13 mm
5.2 Pre-conditions / basis for calculation
The parameters for operation (emptying) of the grease separator system are based on the following values:
– Pumping quantity (extraction capacity) of the disposal vehicle 10 l/s = 36 m³/h.
– Cold/hot water supply 1.7 l/s = 6.1 m³/h (DN 25, 4 bar).
– Room temperature at least +15° C.