Specifications
https://www.ketron.it/images/ketron/Manuali_HTML/SD9/english/00_specifications.html[12/05/2020 15:52:50]
Micro : XLR Input. Gain control. Volume. Reverb. Micro On/Off Edit. Talk.
Voicetron : 3 Voice Voicetron. Manual, Unison, Midi Mode, Pitch Corrections, Autotune, Harmony Duet &
Trio. 10 Voicetron User.
Instruction Manual : Html on board.
Midi : In1 ( Gm ), In 2 ( Keyb ). Out. Thru. Midi Set up : Standard, Computer & Sequencer, Keyboard Right,
Accordion, Player, Style.
Out : Left/Right Stereo, Pedal Volume, Sustain Pedal, Micro Out.
Input : Guitar ( Instrument ) / Micro2.
Headphone : Stereo Headphone. Aux separate Out Assign ( to Drums, Right, Bass, Click).
Optional : Footswitch 6 or 13, Volume Pedal, Sustain pedal, Bag,Hard case, Midi Pedalboard, Hd, SSD,
Start/Stop Pedal.
Power Supply : External 9V-4A.
Dimensions : 108,5 x 14,5 x 40 cm. (42,5 x 5,7 x 15,7 inches).
Weight : 16 Kg. (35 lbs. )
*All specifications and appearances are subject to change without notice.
SAFETY INSTRUCTIONS
RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.
Caution: to reduce the risk of fire or electric shock, do not expose the instrument to rain or humidity.
IMPORTANT INSTRUCTIONS FOR SAFETY AND INSTALLATION
CAUTION – When using an electrical product it is important to take a number of precautions such as the following:
• Read the Instruction Manual before using the instrument.
• An adult should always supervise children when they play the instrument.
• Do not use the instrument in areas subject to seepage or water spray, such as next to a sink, a swimming pool, on a
damp surfaces etc.; do not place containers with liquids on the instrument to prevent accidental seepage of liquid
into the instrument.
• The instrument should be used only on a stand recommended by the manufacturer.
• Do not use the instrument at a very high volume for long periods of time: very high noise levels are dangerous to
health.
• Position the instrument in such a way as to ensure appropriate ventilation.
• Keep the instrument away from heat sources such as central heating radiators, stoves etc.
• Connect the instrument to the mains only with the mains adapter. You will find the identification and power supply
details under the instrument.
• Disconnect the power supply cable if the instrument is not to be used for a long period of time.
• If necessary, disconnect the instrument using the power supply switch on the back panel. When positioning the
instrument, always ensure that this switch is easy to reach.
• Take the instrument to a service centre if:
a. the power supply cable or plug are damaged.
To Next Page
Loading...
