KETRON SD9 - Voice Set

Arranger Setting
https://www.ketron.it/images/ketron/Manuali_HTML/SD9/english/13_arranger_setting.html[12/05/2020 15:59:38]
- TO END: Performs END 1 immediately without waiting whole measures of the arranger (A / B / C / D /) in
use.
- REINTRO: When Style is running, with the command REINTRO enabled, if you press one of three END
buttons SD9 run again the intro instead of going to the END. If the REINTRO button is active as well K.Stop ,
pressing one of the Intro / Ending SD9 performs Ending instead of Intro
LIVE MODELING: In this menu, you can rearrange your own Style inserting new pattern made
available on SD9. Choose from hundreds of templates already programmed by KETRON on different sections such
Drum, Bass, Chord. This environment is explained with more detail on
Live Modeling page
- FILL & DRUM IN : This feature allows you to mute ”on fly” all DRUM part while you play
with ARRANGER parts and automatically can reintroduce the structure DRUM simply by pressing the FILL
button (or BREAK) at any time
- VIEW: Shows the overall status of the Style ie all tracks of the Arranger and the Lower section of the
keyboard. This environment allows to make important changes on Arranger setting .
here is the available features :.
- LIVE GUITAR : Allows you to set the Live Guitar from available database.
- DRUM: Allows you to set the parameters of the Drum section.
- DRUM MIXER: Opens a mixer for the drum where it is possible to enable or mute the individual
percussion instruments of the drum and adjust the volume and reverb of each.
- BASS: Opens the page on which to regulate the Bass track.
- LOWER: Opens the page to adjust the Lower track, namely the section of the keyboard on the left of the split
point.
- 4 VOICE SET: Allows you to modify the 4 Voices of the Upper section.