RECOVERY – Function
Recovery pulse measurement
With the end of training press “RECOVERY”.
The electronic system misses your pulse for 60 seconds in reverse.
Press “RECOVERY”, under “LO” the current pulse value is stored;
under “HI” the pulse value is stored after 60 seconds. Under “%”
the difference of both values is shown. From this a fitness note F
1.1is ascertained.
“RECOVERY” or “RESET” interrupts the function. If no pulse is detec-
ted at the beginning or end of the time reverse, an error message
appears.
Ergometer MX1
25
GB
To Next Page
Loading...
