Kewtech KT63 PLUS

kewtechcorp.com
3
kewtechcorp.com
The KT63 PLUS Multifunction Tester has been designed and built to the highest standards providing
you with a safe and simple solution to your test requirements.
The KT63 PLUS tester is used to verify the safety of Commercial, Domestic and Industrial
installations. All testing is required to meet BS7671: The requirements for Electrical Installations
(IET wiring regulations 2018). The KT63 PLUS covers all aspects of these requirements with ease
of use and safety in mind.
Conformance with Standards
This tester complies with all the latest UK and European regulations.
This tester has been tested according to the following regulations:
• BS EN 61010-2-030:2010 - Safety requirements for electrical equipment for measurement,
control and laboratory use. Particular requirements for testing and measuring circuits.
• BS EN 61326-2-2:2013 - Electrical equipment for measurement, control and laboratory use.
Particular requirements for portable test, measuring and monitoring equipment used in low-
voltage distribution systems.
• BS EN 61557:2007 - Electrical safety in low voltage distribution systems up to 1000V AC.
and 1500V DC. Equipment for testing, measuring or monitoring of protective measures.
• Part 1 : General Requirements
• Part 2: Insulation Requirements
• Part 3: Loop Requirements
• Part 4: Continuity Requirements
• Part 6: RCD Requirements
• Part 7: Phase Rotation Requirements
• Part 10: Multifunction Requirements