kewtechcorp.com
4
>
550V
Caution - refer to the instruction manual.
Caution! Voltage present. Risk of Electric Shock.
Earth.
Construction is double insulated.
Product should be recycled as electronic waste.
User accessible fuse in battery compartment - F0.5A, 500V, HRC 6.3 x 32mm
Prohibited to use on Electrical Systems which use voltages above 550V.
Conforms to EU standards.
CAT III / CAT IV
CAT III Testers are designed to protect against transients and fault currents
in xed equipment installations at the distribution level. Examples are
measurements on distribution boards and socket wiring.
CAT IV Testers are designed to protect against transients and fault currents from
the primary supply level (overhead or underground utility service). Examples are
measurements made before the main fuse or circuit breaker.
Safety
Equipment Markings
WARNING
Read Before Using
• To maintain operator safety use only specied accessories.
• When working on live circuits, use of a proving unit such as the Kewtech KEWPROVE is
recommended to establish correct function of the tester.
• If the equipment is used in a manner not specied by the manufacturer, the protection
afforded by the equipment may be impaired.
• Disconnect from external circuits before removing battery cover.
• Inspect the tester and accessories for damage before use and do not use if damage
is found.
To Next Page
Loading...
Need help?
General
