4.3 Reference test condition
Unless otherwise specified, this specification is dependent on the
following conditions.
⑴ Ambient temperature: 23±5˚C
⑵ Relative humidity: 45 ~ 75%
⑶ Attitude: Horizontal
⑷ Altitude: 2000m or less
Operating temperature and humidity range
0ºC ~ +40ºC Relative humidity: 85% or less (no condensation)
Storage temperature and humidity range
-20ºC ~
+60ºC Relative humidity: 85% or less (no condensation)
Power supply
AA-size R6 / LR6 (HR6) 1.5V (1.2V) batteries x 8
Use of alkaline batteries is recommended. (AA-size nickel hydride
rechargeable batteries are also usable.)
Maximum rated power
Approx. 4.5VA
Outer dimension and weight
Outer dimension: 185(L) × 167(W) × 89(D)mm
Weight: Approx. 1.1kg (instrument with batter
ies)
Symbols used on the instrument:
Equipment protected throughout by DOUBLE INSULATION or
REINFORCED INSULATION
#
Caution (Refer to the accompanying instruction manual)
Fuse
This symbol indicates a fuse.
Battery
This symbol indicates a battery.
Ground
This symbol indicates ground (earth).
Specification
To Next Page
Loading...
