1
Electricity is dangerous and can cause injury and death. Always treat it
with the greatest of respect and care. If you are not quite sure how to
proceed, then stop, take advice from a qualified person.
This instruction manual contains warning and safety rules which must be
observed by the user to ensure safe operation of the instrument and
maintain it in a safe condition. Therefore, read through t
hese operating
instructions before using the instrument.
IMPORTANT:
This instrument must only be used by a competent and trained person
and operated in strict accordance with these instructions.
KEWTECH will not accept liability for any damage or injury caused
by misuse or non-compliance with the instructions or with the safety
procedures.
It is essential to read and to understand the safety rules con
tained in
these instructions and with the safety procedures.
The symbol
#
indicated on the instrument means that the user must refer
to the related sections in the manual for safe operation of the instrument.
Be sure to carefully read instructions following each symbol
#
in this
manual.
#
DANGER is reserved for conditions and actions that are likely
to cause serious or fatal injury.
#
WARNING is re
served for conditions and actions that could
cause serious or fatal injury.
#
CAUTION is reserved for conditions and actions that could
cause minor injury or instrument damage.
Note: This indicates information that is essential for handling the
instruments or should be noted in order to familiarise yourself
with the instruments operating procedures and/or functions.
#
DANGER
● Do not apply any vol
tage to the test socket and test lead of this
instrument.
● For safety reasons, only use the Test Leads designed to be
used with this instrument and recommended by KEWTECH.
● Do not touch the device under test whilst testing is in
progress.
1.Safe testing
To Next Page
Need help?
General
