◆Sensitivity
Sensitivity represents the sensitivity of power assist sensor. It means the motor assist
should start after a certain number of magnets are passing the power assist sensor.
To change the value, press the “+” or the “-” button to choose the sensitivity value. The
default value can be customized.
To store a changed setting, press the “i” button to confirm
Sensitivity setting interface
◆Slow start
Slow start represents slow start-up settings. It is a time duration before you get power
assistance when stepping into the pedals. The range is “0-3”. “3” is the slowest. The default
value is “1”.
To change slow start up settings, press +/- button to choose the desired value. And press the
i button to confirm and store a changed setting.
Slow start setting
To Next Page
Loading...
