Quick Start 2
Keysight E3633A and E3634A Service Guide 27
– The display provides the present operating status of the power supply with
annunciators and also informs the user of error codes. For example, the power
supply is operating in CV mode in the 8V/20A
[1]
or 25V/7A
[2]
range and
controlled from the front panel, then the CV and 8V
[1]
or 25V
[2]
annunciators
will turn on. If, however, the power supply is remotely controlled, the Rmt
annunciator will also turn on, and when the power supply is being addressed
over HPIB interface, the Adrs annunciator will turn on.
[1] For Keysight E3633A Model
[2] For Keysight E3634A Model
To Next Page
Loading...
Need help?
General
