Calibration Procedures 3
Keysight E3633A and E3634A Service Guide 87
Error Messages
The following tables are abbreviated lists of error messages for the E3633A and
E3634A. The errors listed are the most likely errors to be encountered during
calibration and adjustment. A more complete list of error messages and
descriptions is contained in chapter 5 of the E3633A and E3634A User’s Guide.
System error messages
Error Error Messages
-330 Self-test failed
-350 Queue overflow
501 Isolator UART framing error
502 Isolator UART overrun error
503
[a]
[a] This error message is only applicable for serial MY53xx6xxx.
SPI data error
511 RS-232 framing error
512 RS-232 overrun error
513 RS-232 parity error
514 Command allowed only with RS-232
521 Input buffer overflow
522 Output buffer overflow
550 Command not allowed in local
To Next Page
Loading...
Need help?
General
