Quick Start 2
Keysight E3633A and E3634A Service Guide 33
6 Ensure that the current can be adjusted from zero to the full rated value.
Adjust the knob until the ammeter indicates 0 amps and then until the
ammeter indicates 20.0 amps
[1]
or 7.0 amps
[2]
.
[1] For Keysight E3633A Model
[2] For Keysight E3634A Model
If an error has been detected during the output checkout procedures, the
ERROR annunciator will turn on. See “Error Messages’’ for more information,
starting on page 123 in chapter 5 of the User’s Guide.
To Next Page
Loading...
