4 Keysight E364xA User’s and Service Guide
Safety Considerations
Read the information below before using this instrument.
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards for design, manufacture, and intended use of the instrument. Keysight
Technologies assumes no liability for the customer’s failure to comply with these
requirements.
– Use the device with the cables provided with the shipment.
– If the device is used in a manner not specified by the manufacturer, the
device protection may be impaired.
– Always use a dry cloth to clean the device. Do not use ethyl alcohol or
any other volatile liquid to clean the device.
– Do not permit any blockage of the ventilation holes of the device.
To Next Page
Loading...
