Keysight Technologies E4360 Series - Page 24

2 Performance Verification
24 Series E4360 Service Guide
Test Record Form – Keysight E4361A-J11
Keysight Model E4361A-J11 Report No _______________ Date __________________
Description Minimum Specs. Results Maximum Specs.
Constant Voltage Tests
Voltage Programming & Readback
Min. Voltage Vout
Voltage measured over interface
High Voltage Vout
Voltage measured over interface
− 16 mV
Vout − 16 mV
36.8563 V
Vout − 45.5 mV
__________
__________
__________
__________
+ 16 mV
Vout + 16 mV
36.9436 V
Vout + 45.5 mV
CV Load Effect
− 2 mV
__________ + 2 mV
CV Source Effect
− 2 mV
__________ + 2 mV
CV Ripple and Noise (at full and no load)
peak-to-peak (Fixed mode)
rms (Fixed mode)
peak-to-peak (SAS & Table mode)
rms (SAS & Table mode)
N/A
N/A
N/A
N/A
__________
__________
__________
__________
+ 150 mV
+ 22 mV
+ 99 mV
+ 22 mV
Constant Current Tests
Current Programming & Readback
Min. Current Iout
Current measured over interface
High Current Iout
Current measured over interface
−Current measured over interface
− 5 mA
Iout − 5 mA
1.991 A
Iout − 9 mA
Iout − 13 mA
__________
__________
__________
__________
__________
+ 5 mA
Iout + 5 mA
2.009 A
Iout + 9 mA
Iout + 13 mA
CC Load Effect
− 1 mA
__________ + 1 mA
CC Source Effect
− 1 mA
__________ + 1 mA
Test Description E4361A-J11 Setting
Voltage Programming & Readback, Min 0 mV, 2.04 A
Voltage Programming & Readback, High 36.9 V, 2.04 A
CV Load Effect, Source Effect, Ripple and Noise 36.9 V, 2.04 A; Rload for ripple & noise= 18.2 Ω
Current Programming & Readback, Min 0 mA, 37.8 V
Current Programming & Readback, High 2 A, 37.8 V
CC Load Effect, Source Effect 2 A, 37.8 V
SAS Curve settings for Ripple and Noise tests Isc = 2; Imp = 2; Vmp = 36.9; Voc = 40