Keysight Technologies E4360 Series Service Guide

2 Performance Verification
26 Series E4360 Service Guide
Test Record Form – Keysight E4362A-J01
Keysight Model E4362A-J01 Report No _______________ Date __________________
Description Minimum Specs. Results Maximum Specs.
Constant Voltage Tests
Voltage Programming & Readback
Min. Voltage Vout
Voltage measured over interface
High Voltage Vout
Voltage measured over interface
− 50 mV
Vout − 50 mV
107.869 V
Vout − 136 mV
__________
__________
__________
__________
+ 50 mV
Vout + 50 mV
108.131 V
Vout + 136 mV
CV Load Effect
− 2 mV
__________ + 2 mV
CV Source Effect
− 2 mV
__________ + 2 mV
CV Ripple and Noise (at full and no load)
peak-to-peak (Fixed mode)
rms (Fixed mode)
peak-to-peak (SAS & Table mode)
rms (SAS & Table mode)
N/A
N/A
N/A
N/A
__________
__________
__________
__________
+ 150 mV
+ 30 mV
+ 195 mV
+ 24 mV
Constant Current Tests
Current Programming & Readback
Min. Current Iout
Current measured over interface
High Current Iout
Current measured over interface
−Current measured over interface
− 11 mA
Iout − 11 mA
5.478 A
Iout − 22 mA
Iout − 28 mA
__________
__________
__________
__________
__________
+ 11 mA
Iout + 11 mA
5.522 A
Iout + 22 mA
Iout + 28 mA
CC Load Effect
− 1 mA
__________ + 1 mA
CC Source Effect
− 1 mA
__________ + 1 mA
Test Description E4362A-J01 Setting
Voltage Programming & Readback, Min 0 mV, 5.61 A
Voltage Programming & Readback, High 108 V, 5.61 A
CV Load Effect, Source Effect, Ripple and Noise 108 V, 5.61 A; Rload for ripple & noise = 20 Ω
Current Programming & Readback, Min 0 mA, 110.7 V
Current Programming & Readback, High 5.5 A, 110.7 V
CC Load Effect, Source Effect 5.5 A, 110.7 V
SAS Curve settings for Ripple and Noise tests Isc = 5.5; Imp = 5.5; Vmp = 108; Voc = 117

Keysight Technologies E4360 Series Specifications

General

Brand	Keysight Technologies
Model	E4360 Series
Category	Switch
Language	English