Keysight Technologies E4360 Series Service Guide

Performance Verification 2
Series E4360 Service Guide 31
Test Record Form – Keysight E4362A-J06
Keysight Model E4362A-J06 Report No _______________ Date __________________
Description Minimum Specs. Results Maximum Specs.
Constant Voltage Tests
Voltage Programming & Readback
Min. Voltage Vout
Voltage measured over interface
High Voltage Vout
Voltage measured over interface
− 70 mV
Vout − 70 mV
166.0053 V
Vout − 203 mV
__________
__________
__________
__________
+ 70 mV
Vout + 70 mV
166.3946 V
Vout + 203 mV
CV Load Effect
− 2 mV
__________ + 2 mV
CV Source Effect
− 2 mV
__________ + 2 mV
CV Ripple and Noise (at full and no load)
peak-to-peak (Fixed mode)
rms (Fixed mode)
peak-to-peak (SAS & Table mode)
rms (SAS & Table mode)
N/A
N/A
N/A
N/A
__________
__________
__________
__________
+ 150 mV
+ 35 mV
+ 249 mV
+ 28 mV
Constant Current Tests
Current Programming & Readback
Min. Current Iout
Current measured over interface
High Current Iout
Current measured over interface
−Current measured over interface
− 7 mA
Iout − 7 mA
3.3862 A
Iout − 13.8 mA
Iout − 19 mA
__________
__________
__________
__________
__________
+ 7 mA
Iout + 7 mA
3.4138 A
Iout + 13.8 mA
Iout + 19 mA
CC Load Effect
− 1 mA
__________ + 1 mA
CC Source Effect
− 1 mA
__________ + 1 mA
Test Description E4362A-J06 Setting
Voltage Programming & Readback, Min 0 mV, 3.46 A
Voltage Programming & Readback, High 166.2 V, 3.46 A
CV Load Effect, Source Effect, Ripple and Noise 166.2 V, 3.46 A; Rload for ripple & noise = 49 Ω
Current Programming & Readback, Min 0 mA, 170.3 V
Current Programming & Readback, High 3.4 A, 170.3 V
CC Load Effect, Source Effect 3.4 A, 170.3 V
SAS Curve settings for Ripple and Noise tests Isc = 3.4; Imp = 3.4; Vmp = 166.2; Voc = 180

Keysight Technologies E4360 Series Specifications

General

Brand	Keysight Technologies
Model	E4360 Series
Category	Switch
Language	English