Keysight Technologies E4360 Series Service Guide

2 Performance Verification
32 Series E4360 Service Guide
Test Record Form – Keysight E4362A-J18
Keysight Model E4362A-J18 Report No _______________ Date __________________
Description Minimum Specs. Results Maximum Specs.
Constant Voltage Tests
Voltage Programming & Readback
Min. Voltage Vout
Voltage measured over interface
High Voltage Vout
Voltage measured over interface
− 58 mV
Vout − 58 mV
139.837 V
Vout − 170 mV
__________
__________
__________
__________
+ 58 mV
Vout + 58 mV
140.163 V
Vout + 170 mV
CV Load Effect
− 2 mV
__________ + 2 mV
CV Source Effect
− 2 mV
__________ + 2 mV
CV Ripple and Noise (at full and no load)
peak-to-peak (Fixed mode)
rms (Fixed mode)
peak-to-peak (SAS & Table mode)
rms (SAS & Table mode)
N/A
N/A
N/A
N/A
__________
__________
__________
__________
+ 150 mV
+ 32 mV
+ 217 mV
+ 26 mV
Constant Current Tests
Current Programming & Readback
Min. Current Iout
Current measured over interface
High Current Iout
Current measured over interface
−Current measured over interface (@
0.42 A)
− 8 mA
Iout − 8 mA
3.984 A
Iout − 16 mA
Iout − 22 mA
__________
__________
__________
__________
__________
+ 8 mA
Iout + 8 mA
3.984 A
Iout + 16 mA
Iout + 22 mA
CC Load Effect
− 1 mA
__________ + 1 mA
CC Source Effect
− 1 mA
__________ + 1 mA
Test Description E4362A-J18 Setting
Voltage Programming & Readback, Min 0 mV, 4.08 A
Voltage Programming & Readback, High 140 V, 4.08 A
CV Load Effect, Source Effect, Ripple and Noise 140 V, 4.08 A; Rload for ripple & noise = 35 Ω
Current Programming & Readback, Min 0 mA, 143.5 V
Current Programming & Readback, High 4 A, 143.5 V
CC Load Effect, Source Effect 4 A, 143.5 V
SAS Curve settings for Ripple and Noise tests Isc = 4; Imp = 4; Vmp = 140; Voc = 150

Keysight Technologies E4360 Series Specifications

General

Brand	Keysight Technologies
Model	E4360 Series
Category	Switch
Language	English