Need help?Do you have a question about the Keysight Technologies EL30000 Series and is the answer not in the manual?
General| Brand | Keysight Technologies |
|---|---|
| Model | EL30000 Series |
| Category | Accessories |
| Language | English |
States the copyright holder and terms of reproduction for the manual.
Identifies the specific part number for this user's guide.
Indicates the edition number and publication date of the manual.
Provides information about the publisher, Keysight Technologies.
Outlines the terms and conditions of the product warranty.
Mentions that hardware/software is provided under license terms.
Details government rights regarding commercial computer software and technical data.
Refers to obtaining information on software licensed from third parties.
Compliance information regarding the WEEE Directive for product disposal.
Instructions on how to download product declarations of conformity.
General safety precautions to be observed during operation, service, and repair of the instrument.
Explains various safety symbols used in the manual and on the instrument.
Describes relevant regulatory compliance marks and their meanings.
Lists the safety and EMC requirements the instrument is designed to comply with.
Details the operating and storage environmental requirements for the instrument.
Overview of EL30000 Series DC electronic loads, their applications, and models.
Identifies and describes the front panel controls and indicators for EL33133A/EL34143A models.
Identifies and describes the front panel controls and indicators for the EL34243A model.
Identifies and describes the rear panel connectors and ports for EL33133A/EL34143A models.
Identifies and describes the rear panel connectors and ports for the EL34243A model.
Explains the front panel meter view for displaying voltage, current, and power measurements.
Describes the data logger view for monitoring and logging input voltage and current over time.
Provides physical dimensions and airflow information for the instrument.
Instructions for placing, connecting, and preparing the instrument for operation.
Details initial inspection, standard shipped items, documentation, and calibration interval.
Explains constant current (CC) mode operation, where the load sinks current regardless of input voltage.
Explains constant voltage (CV) mode operation, maintaining a set voltage by sinking current.
Explains constant power (CP) mode operation, regulating power drawn from the DUT.
Explains constant resistance (CR) mode operation, sinking current proportional to input voltage.
Guides on connecting the instrument to AC power, including safety precautions.
Instructions on connecting DUT to front and rear input terminals, including binding posts.
Details how to connect multiple inputs in parallel for increased current capability on EL34243A.
Explains how to use remote sensing to improve voltage regulation accuracy at the DUT.
Describes how to connect the instrument via USB, GPIB, and LAN interfaces.
Step-by-step guide for installing the optional GPIB interface module.
Instructions on how to mount the instrument in a standard 19-inch rack cabinet.
Information on installing and using the Keysight IO Libraries Suite for instrument control.
Details on setting the GPIB address and configuring the GPIB interface.
Covers configuring IP address, subnet mask, gateway, DNS, and hostname for network communication.
How to access context-sensitive help for front panel keys and softkeys.
Describes how to navigate and access the list of available help topics.
Steps to power on the instrument and perform initial checks.
Guide on selecting inputs, setting modes, and adjusting parameters like voltage and current.
Explains how to configure and use over-voltage, over-current, and other protection features.
Instructions for selecting between 2-wire and 4-wire sensing for accurate voltage measurements.
Details on setting delays and sequences for input turn-on and turn-off.
Describes how to select and set the operating modes: CC, CV, CR, and CP.
Covers configuration of current, range, sense, and short settings within load modes.
Explains setting the operation mode (Independent or Parallel) for dual-input models.
Describes how to configure and use the digital I/O pins for control functions.
Guide on using the LIST, Continuous, Pulse, and Toggle sequencer modes for automated testing.
Instructions on logging voltage and current data, viewing traces, and exporting logs.
Explains how to use the instrument as an oscilloscope to view voltage and current waveforms.
How to lock/unlock the front panel controls to prevent unintended changes.
Method for capturing and saving the instrument's display to a USB drive.
How to save and recall instrument states and power-on settings.
Configuration of USB, LAN, GPIB, and digital IO parameters for remote operations.
Access to calibration, self-test, user preferences, date/time settings, and help.
How to view and manage the instrument's error queue.
Operations for creating, copying, deleting, and renaming files and folders on a USB drive.
To Next Page
