104 Keysight FieldFox Handheld Analyzers Service Guide
Replaceable Parts
Replaceable Parts Listings
6-
T-8 TORX driver; set to 6 in-lb N/A
T-10 TORX driver; set to 9 in-lb N/A
5/16 inch, open-end torque wrench; set to 10 in-lb N/A
7/16 inch, hex nut wrench or “nut driver”; set to 9 in-lb N/A
9/16 inch, open-end torque wrench; set to 21 in-lb N/A
Tools and Wrenches for N995xA and N996xA Repair
5/8 inch, open-end torque wrench; 3.95 N-m (35 lbf-in) 8710-2792
5/8 inch, open-end torque wrench; 113 N-m (16 ozf-in) 8710-2793
5/16 inch, flare deep socket torque screwdriver; 1.13 N-m (10 lbf-in) 8710-2794
Tool - hand nut starter 8710-2795
Documentation
Users’ Guide. Can also be printed from the Keysight Web site. N9927-90001
Quick Reference Guide N9927-90002
Service Guide. (Not available in printed form. Part number is for reference only. Must be printed
from the Keysight Web site.
N9927-90003
ESD Supplies
Adjustable antistatic wrist strap 9300-1367
Antistatic wrist strap grounding cord (5 foot length) 9300-0980
Static control table mat and earth ground wire 9300-0797
ESD heel strap 9300-1126
Battery
1
Battery- Rechargeable Li Ion 11.1V 4.6A-HR 1420-0908
1. Refer to “Battery Disposal” on page 15 for instructions on disposing of the old battery.
Description Model or Part
Number
To Next Page
Loading...
Need help?
General
