Keysight Technologies FieldFox N9912A Service Guide

Keysight FieldFox Handheld Analyzers Service Guide 111
Repair and Replacement Procedures
Removing and Replacing the Case Group Parts
Removing and Replacing the Case Group Parts
Tools Required
— T-8 TORX driver (set to 6 in-lb)
— T-10 TORX driver (set to 9 in-lb)
— Isopropyl alcohol (Use only in a well ventilated area.)
— Repair and Re-assembly Kit. Refer to “Miscellaneous Parts” on page 103.
Before beginning any repair, disconnect the power cord.

Keysight Technologies FieldFox N9912A Specifications

General

Brand	Keysight Technologies
Model	FieldFox N9912A
Category	Measuring Instruments
Language	English