40 Keysight FieldFox Handheld Analyzers Service Guide
Troubleshooting
Protect Against Electrostatic Discharge (ESD)
4-
Protect Against Electrostatic Discharge (ESD)
This is important. If not properly protected against, electrostatic discharge can
seriously damage your analyzer, resulting in costly repair.
Assembly Replacement Sequence
After identifying the problem requiring an assembly to be replaced, follow
these steps:
Step 1. Order a replacement assembly. Refer to Chapter 6, “Replaceable Parts.”
Step 2. Replace the faulty assembly and determine what adjustments are necessary.
Refer to Chapter 7, “Repair and Replacement Procedures.”
Step 3. Perform the necessary adjustments. Refer to Chapter 3, “Tests and
Adjustments.”
Step 4. Perform the necessary performance tests. Refer to Chapter 3, “Tests and
Adjustments.”
To reduce the chance of electrostatic discharge, follow all of the recommendations outlined in
“Electrostatic Discharge Protection” on page 12, for all of the procedures in this chapter.
To Next Page
Loading...
Need help?
General
