12 Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Measurement Trend / 96
Chart Logic Bus Timing / 98
Chart Logic Bus State / 99
5 Reference Waveforms
To save a waveform to a reference waveform location / 101
To display a reference waveform / 102
To scale and position reference waveforms / 103
To adjust reference waveform skew / 103
To display reference waveform information / 104
To save/recall reference waveform files to/from a USB storage
device / 104
6 Digital Channels
To connect the digital probes to the device under test / 105
Probe cable for digital channels / 106
Acquiring waveforms using the digital channels / 109
To display digital channels using AutoScale / 109
Interpreting the digital waveform display / 110
To change the displayed size of the digital channels / 111
To switch a single channel on or off / 112
To switch all digital channels on or off / 112
To switch groups of channels on or off / 112
To change the logic threshold for digital channels / 112
To reposition a digital channel / 113
To display digital channels as a bus / 114
To Next Page
Loading...
