Multi-Channel Antenna Calibration (MAC) Introduction
Product specifications & characteristics
M9352A PXI hybrid amplifier/attenuator
4 channels
1 GHz analog bandwidth
http://literature.cdn.keysight.com/litweb/pdf/5990-9964EN.pdf
The Keysight M9352A PXI-H IF Amplifier/Attenuator, 10 MHz to 1 GHz is a one-slot,
4-channel, PXI Hybrid IF Amplifier/Attenuator with 1 GHz analog bandwidth providing
IF signal conditioning for use in multi-channel modular solutions.
Combine with the M9362AD01-F26 PXIe μW Quad-Downconverter, up to four
M9202A PXIe Wideband IF Digitizers, and a local oscillator for wideband signal
capture where multiple channels are required for applications such as multi-channel
coherent signal analysis.
The M9352A modules are custom built and tested to nominal* performance
characteristics. Full regulatory and safety testing has been performed. This product
has the same warranty and support services as other Keysight instruments. Because
it is custom built, keysight recommends checking availability and delivery information
before ordering the product.
*Nominal describes representative performance that is useful in the application of the
product when operated over a 20 to 30 degree C temperature range. Nominal
performance is not warranted.
www.keysight.com/find/m9362a-d01
www.keysight.com/find/m9352a
N5183B MXG microwave analog signal generator
13, 20, 31.8 or 40 GHz
+20 dBm output power at 20 GHz
Frequency switching time 600 μs, typical
www.keysight.com/find/n5183b
N5193A UXG microwave agile signal generator
10 MHz, to 20 or 40 GHz
+10 dBm output power with optional attenuator
100 μs switching speed standard; optional 1 μs and 250 nsl
www.keysight.com/find/n5193a
14 Keysight Y1299A-003 MAC Reference Solution Startup Guide
To Next Page
Loading...
Need help?
General
