52 X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Instrument Operating System
Configuring Printers
Configuring Printers
Printers are configured using the Microsoft Windows Control Panel. It is easily
accessed from the Windows Start menu or from under the front panel System
key. This setup process can be done using the touch screen and front-panel
keys. See “Navigating Windows Without a Mouse” on page 66.
When setting up a new printer, you may need to load the printer driver (unless
you are using a network printer that your IT department has set up to include
the driver). The manufacturer of the printer supplies the driver software and
process. That may require that you attach an external USB disk drive. An
alternative is to connect the instrument to the LAN and download the driver
from the printer manufacturer’s internet site.
To Next Page
Loading...
Need help?
General
