Keysight Technologies N9010B-526 Getting Started And Troubleshooting Guide

X-Series Signal Analyzers Getting Started and Troubleshooting Guide 87
Troubleshooting
Returning an Analyzer for Service
Returning an Analyzer for Service
Calling Keysight Technologies
Keysight Technologies has offices around the world to provide you with
complete support for your analyzer. To obtain servicing information or to order
replacement parts, contact the nearest Keysight Technologies office listed
below. In any correspondence or telephone conversations, refer to your
analyzer by its product number, full serial number, and software revision.
Press System, Show System, and the product number, serial number, and
software revision information will be displayed on your analyzer screen. A serial
number label is also attached to the rear panel of the analyzer.

Keysight Technologies N9010B-526 Specifications

General

Resolution Bandwidth	1 Hz to 10 MHz
Input Power Range	-30 dBm to +30 dBm
VBW (Video Bandwidth)	1 Hz to 10 MHz
Input Impedance	50 Ω
Connector Type	N-type
Dimensions	426 mm × 177 mm × 413 mm (W × H × D)