X-Series Signal Analyzers Getting Started and Troubleshooting Guide 41
Instrument Operating System
Customer installation of software
Customer installation of software
3rd Party Software verified by Keysight
Keysight has verified that the following programs are compatible with the
instrument's applications:
—MathWorks MATLAB
Installation of other 3rd Party Software
The X-Series Signal Analyzer platform is an Open Windows environment, so
you can install software on the instrument. However, installation of
non-approved software may affect instrument performance. Keysight does not
warrant the performance of the analyzers with non-approved software
installed.
If you install programs other than those that Keysight has tested, it could cause
problems with the instrument's applications. If this happens, you should try
uninstalling the program that has caused the problem, or try changing the
program's configuration. If this does not correct the problem, you may have to
use the Instrument Recovery system to reinstall the instrument's system
software.
Before installing any additional programs on the instrument, you should
exit the Signal Analyzer application.
Also, you must not remove any applications or programs that were installed
on the instrument when it was shipped from the factory.
To Next Page
Loading...
Need help?
General
