Keysight Technologies X Series Security Features And Document Of Volatility

Security Features and Document of Volatility
SD Memory Card Removal Procedure
42
7 SD Memory Card Removal Procedure
When present, the SD Memory Card is located on the A4 Processor assembly.
However, it can only be accessed after the instrument’s disk drive is removed.
To remove the SD Memory Card:
1. Remove the disk drive by following the “Disk Drive Removal Procedure” on page 39.
Once the disk drive has been removed, the SD Memory Card is accessible.
2. Push in on the SD Memory Card and release. The Card springs back out, and can then
be removed. Figure 7-1 on page 43 shows the instrument rear panel, with the Disk
Drive Assembly and SD Memory Card extracted from the instrument.

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English