Keysight 33210A - Page 151

149
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
(see page 184 for more information)
PULSe:PERiod {<seconds>|MINimum|MAXimum}
PULSe:PERiod? [MINimum|MAXimum]
FUNCtion:PULSe
:HOLD {WIDTh|DCYCle}
:HOLD? [WIDTh|DCYCle]
:WIDTh {<
seconds>|MINimum|MAXimum} 50% to 50% Thresholds
:WIDTh? [MINimum|MAXimum]
:DCYCle {<
percent>|MINimum|MAXimum}
:DCYCle? [MINimum|MAXimum]
:TRANsition {<
seconds>|MINimum|MAXimum} 10% to 90% Thresholds
:TRANsition? [MINimum|MAXimum]
Pulse Configuration Commands
Parameters shown in bold are selected following a *RST (reset) command.
33210A users guide.book Page 149 Wednesday, July 16, 2008 11:16 AM