Keysight 33210A - Page 152

150
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
(see page 189 for more information)
AM Commands AM: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
AM: INTernal
:FREQuency {<
frequency>|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
AM:DEPTh {<
depth in percent>|MINimum|MAXimum}
AM:DEPTh? [MINimum|MAXimum]
AM:SOURce {INTernal|EXTernal}
AM:SOURce?
AM:STATe {OFF|ON}
AM:STATe?
FM Commands FM: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
FM: INTernal
:FREQuency {<
frequency >|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
FM:DEViation {<peak deviation in Hz>|MINimum|MAXimum}
FM:DEViation? [MINimum|MAXimum]
FM:SOURce {INTernal|EXTernal}
FM:SOURce?
FM:STATe {OFF|ON}
FM:STATe?
Modulation Commands
Parameters shown in bold are selected following a *RST (reset) command.
33210A users guide.book Page 150 Wednesday, July 16, 2008 11:16 AM