Keysight 33210A - Page 153

151
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
PWM Commands PW M: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
PWM: INTernal
:FREQuency {<
frequency >|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
PWM:DEViation {<deviation in seconds>|MINimum|MAXimum}
PWM:DEViation? [MINimum|MAXimum]
PWM:DEViation:DCYCle {<
deviation in percent>|MINimum|MAXimum}
PWM:DEViation:DCYCle? [MINimum|MAXimum]
PWM:SOURce {INTernal|EXTernal}
PWM:SOURce?
PWM:STATe {OFF|ON}
PWM:STATe?
Parameters shown in bold are selected following a *RST (reset) command.
33210A users guide.book Page 151 Wednesday, July 16, 2008 11:16 AM