Keysight 34461A - Page 259

DISPlay:TEXT:CLEar
Clears the text message from the display.
Parameter Typical Return
(none) (none)
Clear displayed message:
DISP:TEXT:CLE
l With DISPlay ON, DISP:TEXT:CLEar returns the display to its normal mode.
l With DISPlay OFF, DISP:TEXT:CLEar clears the message and the display remains disabled. To enable
the display, send DISPlay ON or press the front panel [Local] key.
l The display text is unaffected by *RST. It is cleared at power-on.
DISPlay:VIEW {NUMeric|HISTogram|TCHart|METer}
DISPlay:VIEW?
Specifies whether measurement data is displayed in numeric, histogram, trend chart (not available on the
34460A), or bar meter form.
Parameter Typical Return
{NUMeric|HISTogram|TCHart|METer}. Default: NUM. HIST
Display histogram:
DISP:VIEW HIST
l The display is not turned on if the display state is OFF.
l This parameter is set to its default value after a Factory Reset (*RST) or Instrument Preset
(SYSTem:PRESet).
SCPI Programming Reference
260
Keysight Truevolt Series Operating and Service Guide