Instrument Errors (+200…)
+251,"Unsupported temperature transducer type"
+263,"Not able to execute while instrument is measuring"
+292,"State file size error"
+293,"State file corrupt"
+294,"Preference file size error"
+295,"Preference file corrupt"
Miscellaneous Errors (+300... and +500..)
+311,"Not able to specify resolution with Auto range"
+320,"Slave processor communications error: boot message queue overflowed"
+320,"Slave processor communications error: command returned error status"
+320,"Slave processor communications error: communications restart failed"
+320,"Slave processor communications error: communications restart succeeded"
+320,"Slave processor communications error: data packet error detected"
+320,"Slave processor communications error: read error detected"
+320,"Slave processor communications error: write error detected"
+514,"Not allowed; Instrument locked by another I/O session"
+532,"Not able to achieve requested resolution"
+540,"Cannot use overload as math reference"
+541,"Cannot use zero as math reference for PCT scaling function"
+542,"Measured dB reference too small"
SCPI Programming Reference
468
Keysight Truevolt Series Operating and Service Guide
To Next Page
Loading...
