1 Getting Started
46 Keysight 34980A Getting Started Guide
Connecting the 34980A to Your Computer
– Keysight IO Libraries Suite for Windows 98/2000/ME/XP. For information and
installation, refer to www.keysight.com/find/iolib.
– E2094M Keysight IO Libraries for Windows 98/NT/2000/ME/XP. You can find
information and install this application via the Web at www.keysight.com/
find/iolib.
– You can also access other information about Keysight IO Libraries at
www.keysight.com/find/connectivity.
Connecting Over LAN
Selecting the LAN Network Type
You can connect and configure your 34980A for Site LAN or Isolated (non-site)
LAN operation.
– A Site LAN network is defined as a local area network (LAN) in which
computers and LAN-enabled instruments are connected to a site LAN
(workgroup LAN, Intranet, or enterprise LAN) via optional routers, hubs, and/or
switches.
To easily connect the 34980A to your PC, configure and verify your connection,
you can use the Keysight IO Libraries Suite, the E2094M Keysight IO Libraries for
Windows, or an equivalent.
The procedures in this section refer to the Keysight Technologies USB/LAN/GPIB
Interfaces Connectivity Guide. If you have installed the IO Libraries Suite, you
can access the Connectivity Guide via the Keysight IO Libraries Control icon. Or,
you can access the Connectivity Guide via the Web at www.keysight.com/find/
connectivity.
To Next Page
Loading...
