6 Keysight 34980A Getting Started Guide
GENERAL
If this product is not used as specified in the operating instructions, the
protection provided by the equipment could be impaired. This product must
be used in a normal condition (in which all means for protection are intact)
only. Any external connections must be made prior to applying power.
GROUND THE INSTRUMENT
This is a Safety Protection Class I product (provided with a protective
earthing ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth contact. Any
interruption of the protective conductor inside or outside of the product is
likely to make the product dangerous. Intentional interruption is prohibited.
The mains wiring and connectors shall be compatible with the connector
used in the premise electrical system. Inadequate earth grounding can
damage the instrument or cause an electrical shock hazard. Always use the
three prong AC power cord supplied with the instrument or one with equal or
better ratings.
Connect to AC power cord as follows:
– Ensure the power cord is not damaged.
– Install the signal generators so that one of the following items is
readily identifiable and easily reached by the operator: AC power cord,
alternative switch or circuit breaker.
– Insert the mains plug into a socket outlet provided with a protective
earth grounding.
To Next Page
Loading...
