Keysight E36300 Series - Page 20

Steps Instructions Visual
15. For E36311A, remove six hex-lock nuts
from the front panel PCA board using a
1/4" nut socket.
For E36312A and E36313A, remove
seven hex-lock nuts from the front
panel PCA board.
16. Disconnect FPC cable from the front
panel PCA board and lift up the board
from front frame.
17. For E36311A, remove the six plastic
hex-lock nuts from the front panel
frame using a 1/2" nut socket.
For E36312A and E36313A, remove the
seven plastic hex-lock nuts from the
front panel frame.
18. To install the binding post, perform the
above steps in reverse order.
20
Keysight E36300 Series Service Guide