Keysight E4980A/E4980AL Precision LCR Meter 81
Replacement Procedure
Front Panel Assembly Removal
Front Panel Assembly Removal
Tools required
• Torque screwdriver, TORX T10
• Torque screwdriver, TORX T20
• Box torque wrench, 7 mm
• Box torque wrench, 5/8 inch
Removal Procedure
The Front Panel Assembly removal process is same as A2 Analog Board
removal process. Refer to removal procedure of the “A2 Analog Board
Replacement” on page 79.
Replacement Procedure
The Front Panel Assembly replacement process is reverse order of the A2
Analog Board removal process. Refer to removal procedure of the “A2 Analog
Board Replacement” on page 79.
To Next Page
Loading...
