Notices
© Keysight Technologies, Inc. 2015
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement
and written consent from Keysight
Technologies, Inc. as governed by
United States and international copy-
right laws.
Manual Printing History
The manual’s printing date and part
number indicate its current edition.
The printing date changes when a
new edition is printed (minor correc-
tions and updates that are incorpo-
rated at reprint do not cause the date
to change). The manual part number
changes when extensive technical
changes are incorporated.
February 2015 First Edition
Manual Part Number
E4991-90200
Edition
First Edition, February 2015
Printed by Keysight Technologies
International Japan G.K., 1-3-3 Higa-
shikawasaki-cho, Chuo-ku, Kobe-shi,
Hyogo, Japan.
Warranty
The material contained in this
document is provided “as is,” and
is subject to being changed, with-
out notice, in future editions. Fur-
ther, to the maximum extent
permitted by applicable law, Key-
sight disclaims all warranties,
either express or implied, with
regard to this manual and any
information contained herein,
including but not limited to the
implied warranties of merchant-
ability and fitness for a particular
purpose. Keysight shall not be
liable for errors or for incidental
or consequential damages in con-
nection with the furnishing, use,
or performance of this document
or of any information contained
herein. Should Keysight and the
user have a separate written
agreement with warranty terms
covering the material in this doc-
ument that conflict with these
terms, the warranty terms in the
separate agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are fur-
nished under a license and may be
used or copied only in accordance
with the terms of such license
Restricted Rights Legend
If software is for use in the perfor-
mance of a U.S. Government prime
contract or subcontract, Software is
delivered and licensed as “Commer-
cial computer software” as defined in
DFAR 252.227-7014 (June 1995), or
as a “commercial item” as defined in
FAR 2.101(a) or as “Restricted com-
puter software” as defined in FAR
52.227-19 (June 1987) or any equiva-
lent agency regulation or contract
clause. Use, duplication or disclosure
of Software is subject to Keysight
Technologies’ standard commercial
license terms, and non-DOD Depart-
ments and Agencies of the U.S. Gov-
ernment will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no
greater than Limited Rights as defined
in FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November
1995), as applicable in any technical
data.
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in dam-
age to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
NOTE
This Note sign denotes important
information. It calls attention to a
procedure, practice, or condition
that is essential for the user to
understand.
To Next Page
Loading...
