2 Impedance Analyzer
Caution
Do not exceed the operating input power, voltage, and
current level and signal type appropriate for the
instrument being used, refer to your instrument's Function
Reference.
Electrostatic discharge (ESD) can damage the highly
sensitive microcircuits in your instrument. ESD damage is most
likely to occur as the test fixtures are being connected or
disconnected. Protect them from ESD damage by wearing a
grounding strap that provides a high resistance path to ground.
Alternatively, ground yourself to discharge any static charge
built-up by touching the outer shell of any grounded instrument
chassis before touching the test port connectors.
Safety Summary
When you notice any of the unusual conditions listed below,
immediately terminate operation and disconnect the power cable.
Contact your local Keysight Technologies sales representative or
authorized service company for repair of the instrument. If you
continue to operate without repairing the instrument, there is a
potential fire or shock hazard to the operator.
• Instrument operates abnormally.
• Instrument emits abnormal noise, smell, smoke or a spark-like
light during operation.
• Instrument generates high temperature or electrical shock
during operation.
• Power cable, plug, or receptacle on instrument is damaged.
• Foreign substance or liquid has fallen into the instrument.
To Next Page
Loading...
