Keysight EXA N9010A Measurement Guide

24
Radiated Emissions Measurement Examples
Making Radiated Emission Measurements
Adding signals to the list
Step Action Notes
1 Set the search criteria
to peak criteria and
limits
a. Press Meas Setup, More 1 of 2,
Limits, Search Criteria, Peak
Criteria and Limits.
This is the default value.
2 Switch to search a. Press Meas Setup, Scan
Sequence, Search Only.
3 Add signals to the
Signal List
a. Press Sweep/Control, Start.

Keysight EXA N9010A Specifications

General

Brand	Keysight
Model	EXA N9010A
Category	Measuring Instruments
Language	English